View MUR2020CTPBF_1131909.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20895 rev. A 12/05
MUR2020CTPBF
Ultrafast Rectifier
Features
* * * * * Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature Lead-Free ("PbF" suffix)
trr = 25ns IF(AV) = 20Amp VR = 200V
Description/ Applications International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultra fast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
VRRM IF(AV) IFSM IFM TJ, TSTG Peak Repetitive Peak Reverse Voltage Average Rectified Forward Current Total Device, (Rated V R ), TC = 145C Non Repetitive Peak Surge Current Peak Repetitive Forward Current (Rated V R , Square wave, 20 KHz), TC = 145C Operating Junction and Storage Temperatures -65 to 175 C Per Leg Total Device Per Leg Per Leg
Max
200 10 20 100 20
Units
V A
Case Styles
MUR2020CTPBF
Base Common Cathode
2
1
Anode
2 Common Cathode
3
Anode
TO-220AB
www.irf.com
1
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameters
VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage
Min Typ Max Units Test Conditions
200 55 8.0 0.85 1.15 1.05 15 250 V V V V A A pF nH IR = 100A IF = 8A, TJ = 125C IF = 16A, TJ = 25C IF = 16A, TJ = 125C VR = VR Rated TJ = 150C, VR = VR Rated VR = 200V . Measured lead to lead 5mm from package body
IR
Reverse Leakage Current
-
CT LS
Junction Capacitance Series Inductance
-
Dynamic Recovery Characteristics @ TJ = 25C (unless otherwise specified)
Parameters
trr Reverse Recovery Time
Min Typ Max Units Test Conditions
-
21 35
35 25 -
ns
IF = 1.0A, diF/dt = 50A/s, VR = 30V IF = 0.5A, IR = 1.0A, IREC = 0.25A TJ = 25C TJ = 125C IF = 10A VR = 160V diF /dt = 200A/s
IRRM
Peak Recovery Current
-
1.9 4.8 25 -
78
A
TJ = 25C TJ = 125C
Qrr
Reverse Recovery Charge
-
nC -
TJ = 25C TJ = 125C
Thermal - Mechanical Characteristics
Parameters
TJ TStg RthJC RthJA RthCS Wt Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to CasePer Leg Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Per Leg
Min
- 65 - 65 -
Typ
0.5 2.0 0.07 -
Max
175 175 2.5 50 12 10 MUR2020CT
Units
C
C/W
g (oz) Kg-cm lbf.in
Mounting Torque
6.0 5.0
Marking Device
Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
100
(A)
100
T J = 175C 150C
10
Reverse Current - I
R
1
125C 100C
0.1
25C
Instantaneous Forward Current - I F (A)
10
TJ = 175C T = 125C J T = 25C J
0.01
0.001 50 100 150 200 250 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000
Junction Capacitance - C T (pF)
0
1
T = 25C J
100
0.1 0 0.4 0.8 1.2 1.6 Forward Voltage Drop - VFM (V) 2
10 1 10 100 1000 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
Fig. 1 - Typical Forward Voltage Drop Characteristics
10
Thermal Impedance Z thJC (C/W)
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
Notes:
PDM
t1 t2
0.1
Single Pulse (Thermal Resistance)
1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001
0.001
0.01
0.1
1
t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
180
Allowable Case Temperature (C) Average Power Loss ( Watts )
15
RMS Limit
170
DC
12
160
9
D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC
150
Square wave (D = 0.50) Rated Vr applied
6
140
3
see note (2)
130 0 3 6 9 12 15
Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current
0 0 3 6 9 12 15
Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics
50
IF = 20 A IF = 10 A IF = 5 A
250
VR = 160V TJ = 125C TJ = 25C
40
200
IF = 20 A IF = 10 A IF = 5 A
Qrr ( nC )
VR = 160V TJ = 125C TJ = 25C
trr ( ns )
30
150
20
100
10
50
0 100
di F /dt (A/s )
1000
0 100
di F /dt (A/s )
1000
Fig. 7 - Typical Reverse Recovery vs. di F /dt
Fig. 8 - Typical Stored Charge vs. di F /dt
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = V R1 x IR (1 - D); IR @ VR1 = rated VR
4
www.irf.com
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
Reverse Recovery Circuit
VR = 200V
0.01 L = 70H D.U.T.
di F /dt dif/dt ADJUST
D G IRFP250 S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
IF 0
t rr ta tb
4
2
Q rr I RRM
0.5 I RRM di(rec)M/dt 0.75 I RRM
5
1
/dt di fF/dt
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
Outline Table
10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 2.92 (0.11) 2.54 (0.10) TERM 2 DIA. 6.48 (0.25) 6.23 (0.24)
1 2 3
1.32 (0.05) 1.22 (0.05)
BASE COMMON CATHODE 2
2
ANODE COMMON ANODE CATHODE 1 2
123 4.57 (0.18) 4.32 (0.17)
0.61 (0.02) MAX.
5.08 (0.20) REF.
Conforms to JEDEC Outline TO-220AB Dimensions in millimeters and (inches)
Part Marking Information
IRXC Assembly Line EXAMPLE: THIS IS A MU2020CT LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" PART NUMBER
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
DATE CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C
IRMX Assembly Line EXAMPLE: THIS IS A MUR2020CT LOT CODE 1789 ASSEMBLED ON WW 19, 2001
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
PART NUMBER
DATE CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE
6
www.irf.com
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
Ordering Information Table
Device Code
MUR 20
1 2
20
3
CT
4
PbF
5
1 2 3 4 5
-
Ultrafast MUR Series Current Rating (20 = 20A) Voltage Rating (20 = 200V) CT = Center Tap (Dual) none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces
MUR2020 ******************************************** * SPICE Model Diode * ******************************************** .SUBCKT MUR2020 ANO CAT D1 ANO 1 CAT *Define diode model .MODEL DMOD D (IS=1.04703N N=1.44364 BV=280 IBV=100P RS=7.57994M + CJO=218.618P VJ=700M M=399.212M EG=1.11 RL=17.4782G)
********************************************
.ENDS MUR2020 Thermal Model Subcircuit .SUBCKT MUR2020 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 3.93E+01 2.67E+02 5.20E+02 1.66E+03 1.12E+00 1.04E+00 1.57E-01 1.89E-01
.ENDS MUR2020
www.irf.com
7
MUR2020CTPBF
Bulletin PD-20895 rev. A 12/05
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/04
8
www.irf.com

▲Up To Search▲

Price & Availability of MUR2020CTPBF

	To Download MUR2020CTPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .